Tile lippage: how much is too much?
What the ANSI standard allows, three ways to check it yourself, why it happens, and when to raise it with your installer.
Lippage is when one tile edge sits higher than the tile next to it. You feel it with bare feet. You see it when light rakes across the floor in the morning. On a wall, it throws a shadow along every joint.
Some lippage is normal. Tile isn't perfectly flat, and neither is any floor. The question is how much, and whether it was the tile or the installation.
How much lippage is allowed
The U.S. installation standard for tile, ANSI A108.02, sets the allowable lippage based on the grout joint width:
- Grout joints under 1/4″: up to 1/32″, plus the tile's own allowable warpage
- Grout joints 1/4″ and wider: up to 1/16″, plus the tile's own allowable warpage
1/32″ is about the thickness of a credit card. If you can catch a fingernail on the edge, or a coin stands up against it, it's worth measuring.
How to check it
- The hand test. Run your flat palm slowly across the tile in several directions. Edges you can feel clearly are the ones to measure.
- The flashlight test. Turn off the overhead lights and lay a flashlight on the floor, pointed across the tile. Raised edges cast a shadow on the lower tile.
- The straightedge test. Lay a straightedge across the joint. Slide a feeler gauge, a stack of credit cards, or a coin under the gap to estimate height.
Why it happens
- The floor wasn't flat. Tile follows the substrate. Large-format tile needs a flatter floor than small tile, and the prep work is often skipped.
- Not enough mortar coverage. Large tiles generally need mortar on the back of the tile as well as the floor. Skip it and the tile can rock or settle unevenly.
- Wrong layout for the tile. Long plank tiles set with a 50% offset tend to amplify any bow in the tile. Many manufacturers call for an offset of 33% or less. Check the box.
- No leveling system. Clip-and-wedge leveling systems are cheap and common on large-format jobs. They don't fix a bad floor, but they help on a good one.
When to raise it
Before grout. Lippage on fresh-set tile can sometimes be corrected while the mortar is still workable. Once it cures, fixing one tile means breaking it out.
Before you pay for the tile phase. If the tile is already grouted, document it before you release payment for that phase. Take raking-light photos with a ruler or coin in frame.
When it's a trip or water issue. A raised edge in a walkway is a trip hazard. Lippage in a shower can direct water away from the drain. Both are worth fixing, not just noting.
Get an outside read
Lippage arguments go nowhere when it's your opinion against the installer's. A written read from a tile pro changes the conversation.
Start a Professional Review. Upload raking-light photos and close ups with a ruler in frame. A vetted pro sends back a written Review with each problem joint pinned to your photo, and what they'd expect to fix it. $49, dispute-ready, no connection to your installer.
A Review is a visual observation of workmanship. It does not replace an on-site inspection or a municipal inspection.